Author Message
MichaelWest
Joined: Jan 17, 2006
Messages: 0
Offline
I didn't see it in the getModelClasses list, but it could have a different name.

So, can AES SMS support modification of the Uniform Dial Plan? From the above list, I can see that it support the standard dialplan, but a customer needs it to support the UDP tables.

Thank you.
JohnBiggs
Joined: Jun 20, 2005
Messages: 1139
Location: Rural, Virginia
Offline
Michael,
Which specific sat commands are you interested in using? Full support of UDP implies quite a few forms.
MichaelWest
Joined: Jan 17, 2006
Messages: 0
Offline
Primarily the addition and deletion of numbers in the UDP forms.

A custom has a fairly dynamic number setup that requires heavy use of the UDP tables to allow for seamless dialing. So, the creation of a station on one CM requires the addition of that station number on the other CM in the UDP form.

Yes, I have told them why this isn't that good of an idea ...
JohnBiggs
Joined: Jun 20, 2005
Messages: 1139
Location: Rural, Virginia
Offline
So you are requesting that the 'change uniform-dialplan X' form be supported by SMS? Any other forms? Remember that the more specific you are the more likely you are to get what you want/need.
JohnBiggs
Joined: Jun 20, 2005
Messages: 1139
Location: Rural, Virginia
Offline
Per our phone conversation, I will enter an enhancement request for the UDP releated forms you need to be supported to the SMS development team.

John
Go to:   
Mobile view