Well, seems that my English is not so good. Under "broken lines" I meant that they are changed from direct arrows to squeezed (thanks for an accurate word) arrows. Of cause your are right and we can use there alignment buttons but after project import on different computers\laptops we must do it again.
And my question also was is there any way to fix or fix elements in groups on the flow?
Actually, grouping of elements is another question: is there any way to group elements, so, you can move the group simultaneously?

Hi,
The point here is that I have 1920*1080 at both monitor and laptop screen.

Hi Guys,

Can you please help to understand the following issue?

Sometimes I work from home and sometimes from office. I have different monitors at these places.
The problem is: when I change my monitor then I have broken arrows on the flow screen.
Please check a screenshot.
Actually, I noticed this strange behavior a long time ago. But nowadays due to a lot of different projects with different developers the problem become very serious. Initially I blamed developers for inaccuracy during project development. But the reality shows that the flow view changes from monitor to monitor. If you have a big monitor with big resolution then seems that there is no problem but when you open flow in small monitor then arrows which connect different blocks - become ugly.
In the same time I do not see any changes in git for main.flow file (if you move any block on the flow then you will get changes in the main.flow) , so, it seems that it is internal OD stuff.

Is there any way to fix the scheme on the flow?
Or may be it is a known issue and you know how to fix/improve it?

Thanks in advance!
Vasily.

Hi,

Seems that I was not clear enough.

Example.
I have a complex variable "grocery" with fields "fruits", "vegetables", "berries":
grocery
fruits
vegetables
berries

I receive an answer from a webservice like:
fruits: apple, orange, grape
vegetables: potato, tomato, pepper
berries: strawberry, blackberry

I can create and parse web service answer to three simple variable, like grocery_fruit, grocery_vegetables, grocery_berries.
But I want to keep all the data in one complex variable. So, I want to parse web service answer and put data in according field of complex variable.

So, this is the case.

Hi, thanks for a reply.

Once again, to avoid misunderstanding.
I have a Main IVR_Main which uses a module IVR_GetPay. The question is in appliance of fetchtimeout in different cases.
1. If I set the fetchtimeout in AppRoot of IVR_Main then it will be a global value for all modules as well?
2. If I set the fetchtimeout in AppRoot of module IVR_GetPay then the value of fetchtineout will be used inside IVR_GetPay only with out affecting IVR_Main?

I want to understand if I need to change the fetchtimeout for one specific web service invocation without affecting all others what is the best way: to set fetchtimeout before ws invocation and set it back after?

Thanks in advance!
Vasily.

And one more question.

There is an operation "Parse".
The question here is: why it is not possible to specify a destination variable as a field in a complex variable?
Nowadays only a simple variable can be used as a destination variable.

Hi Gurus,
Seems that I really need your help with investigation of some strange situation.
I am faced with something similar lake that https://www.devconnectprogram.com/forums/posts/list/17281.page#p70297

In short:
1. I have a Main IVR.
2. I have a Module which I use in Main IVR.
3. Module makes a request to a REST web service. I make it via Java code in Servlet (I do not use in this app REST Connector). Timeout to request is set to 15 seconds.
4. Web service does not provide an answer in 15 seconds. In Module I have special code to process such behavior but in reality the code does not work.
5. In trace.log I receive error.badfetch BUT in Main IVR. And all the processing of an error in Main IVR.
6. In trace.log Then I receive "AxisFault: Read timed out"(seems that 15 seconds had gone) from the Module and then "Capturing exception [java.lang.NullPointerException]. Message [null] " from the module right after timeout.

In the catalina.out I have several errors.
************************************************************************************************************
Request is invalid sessionid [E1C69F22ADD5871F5E458F6AF0FFCCC0:/RSHB_CallSteering] class [flow.JAVA_OCRM_GetApplicationByPhone] and saved class name [flow.TRANSF_ErrorHandler is -> false
Request is invalid sessionid [E1C69F22ADD5871F5E458F6AF0FFCCC0:/RSHB_CallSteering] class [flow.JAVA_OCRM_GetApplicationByPhone] and saved class name [flow.TRANSF_ErrorHandler is -> false
*** Abandoning thread sessionid [E1C69F22ADD5871F5E458F6AF0FFCCC0:/RSHB_CallSteering], request invalid AppServlet, ignore trace above
*** Abandoning thread sessionid [E1C69F22ADD5871F5E458F6AF0FFCCC0:/RSHB_CallSteering], request invalid AppServlet, ignore trace above
Request is invalid sessionid [E1C69F22ADD5871F5E458F6AF0FFCCC0:/RSHB_CallSteering] class [flow.Start] and saved class name [flow.TRANSF_ErrorHandler is -> false
Request is invalid sessionid [E1C69F22ADD5871F5E458F6AF0FFCCC0:/RSHB_CallSteering] class [flow.Start] and saved class name [flow.TRANSF_ErrorHandler is -> false
***** Saw exception, tracing before report
java.lang.NullPointerException
at ocrmws.GetApplicationByPhone.getApplicationByPhoneWS(GetApplicationByPhone.java:185)
at ocrmws.GetApplicationByPhone.run(GetApplicationByPhone.java:198)
at flow.JAVA_OCRM_GetApplicationByPhone.servletImplementation(JAVA_OCRM_GetApplicationByPhone.java:81)

************************************************************************************************************

So, my assumption: in Main IVR for some reason I have fetch timeout 15 seconds (I do not know what is the default value for that timeout) and it happens several milliseconds earlier than the Axis timeout in the Module.
That's why I do not have a proper processing of axis timeout in Module but error.badfetch in Main IVR. And after bad fetch the session is invalidated and threads in Module are not valid anymore.
And that's why I see errors in catalina.out
Abandoning thread sessionid....
Request is invalid sessionid....


Can you please tell me If I correctly understand the situation?

If yes, then how I can check and set the default fetch timeout while using Module?

My brain is burning ... please tell me if I right or not... ?

Thanks in advance!

Hi,
Thanks for the tip.

But my assumption was that it is possible somehow to do it in Servlets via Java code.
And I thought that it is like changing Database connection in context.xml file.
So, just need to inherit some pim class, override some method and voila...

Well, yes.
Dynamically formed activity name can be sometimes very powerful.

And of cause Message field which I need from time to time to fill with some variable instead of constant text.

So, to solve it I use Servlets with Java code to implement such idea.

Hi gurus!

Can you please tell me if it is possible to somehow configure POM Connector settings outside application?

Another question is it possible to set POM connector data in a config file and set it in runtime?

Thanks in advance!
Vasily.

Hi guys!

I have one more question\proposal.

All the time I do reporting or tracing with "Trace" and "Report" items I think about: why it is not possible to use variables in Activity name or Message fields?

Sometimes it could very simplify code. Otherwise I force to add Servlet and make reporting in Java code.

What do you think?

Thanks for your opinion!

Hi,
ok, I see.
But do you have any thoughts why it could happen? I believe you have already faced with such behavior.
Thanks in advance!

Hi,
Ok, I see...

But how to investigate why we have from time to time such errors?

Hello,
Can you please tell me what do you think about the following proposal?
I know it is not a fresh idea, but would like to know you professional opinion.

In OD Database Connector we change IP address to DNS name.
On all AppServers modify hosts file (or something like that) to resolve DNS name.
No need to modify config/catalina/localhost/<app>.xml. No need to rebuild OD app at all.

What do you think?

Thanks in advance!