Message |
[+]
Avaya Orchestration Designer
» Execute procedure with dbo operation with tableTypes as param, 08/08/2020 17:02:12
» Go to message
|
|
Can i execute an store procedure with a table data types as param using dbo operation?
|
|
[+]
Avaya Orchestration Designer
» CAV Variables cannot be accessed from application server., 13/08/2018 11:11:18
» Go to message
|
|
Hi Rick,
you need to check the axis2 version that you are using now, becouse the axis2 of the version 7.0.1 is minor than the axis2 version of 7.2. check the vpapplogclient and copy the trace here.
|
|
[+]
Avaya Orchestration Designer
» Creating IprojectVariables Dynamicly, 13/08/2018 08:39:18
» Go to message
|
|
Hi Guys, is there a way to create IprojectVariables in execution time?
the case is this, i have to develop a dymamic prompt via java, and i have to add multiples audioVariables.
this is my code :
I have this in a cycle , but if i have just a single var always the annouce going to promt the same audio rigth ?
add(1, new com.avaya.sce.runtime.PhraseVariableElement("Variable", com.avaya.sce.runtime.PhraseVariableElement.Type.AUDIO_URL,false));
if wasn't "audio url " i can use phrases from phaseset, but i need to add new audios with not deploy again the app.
Thanks in advance.
|
|
[+]
Avaya Orchestration Designer
» Aes Connection Monitoring from WAS, 30/07/2018 10:30:24
» Go to message
|
|
Hi Guys,
Exist any posibility to do an application web , or OD etc, to monitoring if the connection beetwen AES and was are connected.
i Kkow that the AES connector do that, but just write into the log file. we need an advice when this happens.
what are the options to do that ?
Thanks in advance.
|
|
[+]
Avaya Orchestration Designer
» Web Applications get file from user, 06/06/2018 16:06:46
» Go to message
|
|
Thanks Wilson,
I have checked and i see the form is always create as multipart/data , so i just modify the type of the input as you said.
Thanks so much.
best Regards.
|
|
[+]
Avaya Orchestration Designer
» Web Applications get file from user, 06/06/2018 10:06:27
» Go to message
|
|
Hi guys,
Is there any component in the Od web APP to capture a input from user as a file (.pdf, .txt, etc).
Or we have to custom the jsp template and create the new form that accept the file.
Thanks in advance.
|
|
[+]
Avaya Orchestration Designer
» Junit Test , Error Generting SCESession, 19/02/2018 17:04:56
» Go to message
|
|
Hi Ross, thanks for answering. Efectively, we have double checked before about changed the ("/PlatformTest/Start") with a valid URL in the file MockHttpRequest.java specifically in the method getRequestURI(), but when we do that and run the application it gets freeze in the class TestSCESession, method SCESession session = SCESession.getSession(request, response, servlet, "___ccaccess").
Thanks in advance.
|
|
[+]
Avaya Orchestration Designer
» Junit Test , Error Generting SCESession, 19/02/2018 16:39:36
» Go to message
|
|
Hi Guys,
we are trying to test with junit and simulate the SCESession object, we downloaded the mock from https://www.devconnectprogram.com/forums/posts/list/21684.page#p152131 , but when run the test the following error appears :
java.net.MalformedURLException: no protocol: /PlatformTest/Start
no protocol: /PlatformTest/Start
Exception in thread "main" com.avaya.sce.runtimecommon.SCERuntimeException: Runtime Error, ddrt.properties missing :java.net.MalformedURLException: no protocol: /PlatformTest/Startjava.net.MalformedURLException: no protocol: /PlatformTest/Start
**** Root Cause
java.net.MalformedURLException: no protocol: /PlatformTest/Start
at java.net.URL.<init>(URL.java:585)
at java.net.URL.<init>(URL.java:482)
at java.net.URL.<init>(URL.java:431)
at com.avaya.sce.runtimecommon.SCESession.loadPropsFromUrl(SCESession.java:238)
at com.avaya.sce.runtimecommon.SCESession.getSession(SCESession.java:466)
at com.avaya.sce.runtimecommon.SCESession.getSession(SCESession.java:286)
at com.avaya.sce.ingenian.runtime.TestSCESession.getTestSessionInstance(TestSCESession.java:69)
at com.avaya.sce.ingenian.runtime.TTest.main(TTest.java:6)
how can i fix this ?
Thanks in advance, Best Regards.
|
|
[+]
Avaya Orchestration Designer
» SOAP error handling Experience Portal 7.x vs Voice Portal 5.x, 13/02/2018 08:04:54
» Go to message
|
|
What version of axis2 are you using for your client. maybe is a conflit between the axis of EP 7.x and Axis lib in your application server.
|
|
[+]
Avaya Orchestration Designer
» Web application theme for RTL languages., 13/02/2018 08:03:18
» Go to message
|
|
|
|
[+]
Avaya Orchestration Designer
» interrupted announcement by DTMF, 13/02/2018 07:59:54
» Go to message
|
|
HI.
you can use after the prompt from the palette the node flushPromt to avoid continue to other node before the promt in the announcement finish and set barge in in false for each prompt.
or you can put all the prhases into a single prompt in a menu and set the barge in in false, to avoid dtfm while is promted.+
best regards
|
|
[+]
Avaya Orchestration Designer
» Axis2 Problems, 13/02/2018 07:51:48
» Go to message
|
|
Hi Cemil,
for webShepre follows next steps and recomendation, you can fin this in the OD dev_guide :
Performing additional WebSphere configuration
About this task
For WebSphere 7.0 and later, the Axis2 library files provided by Orchestration Designer conflicts
with the Axis2 library files from WebSphere installation. Therefore, you must configure a separate
class loader for Orchestration Designer applications to use Axis2 library effectively.
Perform the following steps for the additional WebSphere configuration:
Procedure
1. Open the WebSphere Administrative Console.
2. On the Environment menu, click Shared libraries and create a shared library.
3. Copy the following entries into the Classpath field:
${WAS_INSTALL_ROOT}/lib/ext/axiom-api-1.2.13.jar
${WAS_INSTALL_ROOT}/lib/ext/axiom-dom-1.2.13.jar
${WAS_INSTALL_ROOT}/lib/ext/axiom-impl-1.2.13.jar
${WAS_INSTALL_ROOT}/lib/ext/axis2-adb-1.6.2.jar
${WAS_INSTALL_ROOT}/lib/ext/axis2-adb-codegen-1.6.2.jar
${WAS_INSTALL_ROOT}/lib/ext/axis2-json-1.6.2.jar
${WAS_INSTALL_ROOT}/lib/ext/axis2-kernel-1.6.2.jar
${WAS_INSTALL_ROOT}/lib/ext/axis2-saaj-1.6.2.jar
${WAS_INSTALL_ROOT}/lib/ext/axis2-transport-http-1.6.2.jar
${WAS_INSTALL_ROOT}/lib/ext/axis2-transport-local-1.6.2.jar
${WAS_INSTALL_ROOT}/lib/ext/neethi-3.0.2.jar
${WAS_INSTALL_ROOT}/lib/ext/woden-api-1.0M9.jar
${WAS_INSTALL_ROOT}/lib/ext/woden-impl-dom-1.0M9.jar
${WAS_INSTALL_ROOT}/lib/ext/woden-tool-1.0M9.jar
${WAS_INSTALL_ROOT}/lib/ext/XmlSchema-1.4.7.jar
${WAS_INSTALL_ROOT}/lib/ext/VPWebServiceClient-<version>.jar
${WAS_INSTALL_ROOT}/lib/ext/VPAppLogClientWS_<version>.jar
You must modify the version for VPWebServiceClient -<version>.jar according to
the file deployed in the lib or ext directory.
4. Click Servers > Server Types > WebSphere application servers to navigate to the server
configuration page.
5. From the server list, select the server that you want to associate with the shared library.
6. Click Java and Process Management in Server Infrastructure section, and click the Class
Loader link.
7. Create a new class loader, and set the class loader order to Classes loaded with local
class loader first (parent last). Click OK.
8. Select the newly create class loader.
9. On the Configuration page, click the Shared library references link.
10. On the Configuration page, ensure that the shared library you created is selected.
11. Click OK to save the configuration.
12. Make sure you verify all the configuration has been saved, and restart the application server.
best regards
|
|
[+]
Avaya Orchestration Designer
» Syntax error, parameterized types are only available if source level is 1.5 or greater, 05/02/2018 11:01:19
» Go to message
|
|
You have to check the compiler for eclipse or what compiler are you trying tu use in the app.
|
|
[+]
Avaya Orchestration Designer
» Axis2 Problems, 01/02/2018 14:54:34
» Go to message
|
|
HI ,
when you created a client with java, you need to use another lib addtional to axis2 or axis , in this case you need to add the following to your lib in the webServe :
axiom-api
axiom-dom
axiom-impl in the version that have in your local enviroment.
maybe you have to add neethi too.
|
|
[+]
Avaya Orchestration Designer
» Need Assistance on Installing DigiCert certificates on IVR - Tomcat application Server, 17/01/2018 09:37:04
» Go to message
|
|
Hi, you just need to add the new certificate via runtimeconfig app deployed on tomcat. go to Manager apps-> runtimeconfig -> login -> certificates -> and add the new cert.
you should remove the old cert too.
best Regards
|
|