Message |
[+]
Avaya Orchestration Designer
» OD Application not working Using F5 Load Balancer, 21/06/2023 12:23:23
» Go to message
|
|
Hi,
I check the file on my tomcat directory but there is no logs for the errors.
Can you please tell me is there any specific setting I need turn on for logs to create in 'vpapplogclient.log' file.
Thanks
|
|
[+]
Avaya Orchestration Designer
» OD Application not working Using F5 Load Balancer, 21/06/2023 07:09:04
» Go to message
|
|
Hi,
I am not using CAV variable.
Can you please tell me where I will get 'vpapplogclient.log' file.
Thanks
|
|
[+]
Avaya Orchestration Designer
» OD Application not working Using F5 Load Balancer, 21/06/2023 04:36:12
» Go to message
|
|
Hello massimo__croci,
Thanks for the reply.
Other than above errors I am not getting any errors in the OD application logs.
The problem is When I am using the F5 then my call is going to Bedfetch event node (I am catching error.bedfetch event in APPRoot node).
Without the F5 the call is working fine.
I compared the trace.log file of the application for Good and Bad call. I can see there is some parameters from VPMS is missing. I am not sure this will be the issue.
Below are the parameters which is missing in Bad call VS Good call:
BAD CALL LOGS:
21/06/2023 05:18:12:703 INFO - fefefefef%3A%AppName : SCESession bound to HttpSession fefefefef
21/06/2023 05:18:12:703 INFO - fefefefef%3A%AppName : Browser Version 2.1.4, terminationURL enabled : true
21/06/2023 05:18:12:703 DEBUG - fefefefef%3A%AppName : PlatformParams:getPlatformParams: __VPVarGlobalDate is 1687192324161
21/06/2023 05:18:12:703 DEBUG - fefefefef%3A%AppName : PlatformParams:getPlatformParams:Timestamp is 06/19/23 12:32:04
21/06/2023 05:18:12:703 INFO - fefefefef%3A%AppName : Using SCESession fefefefef%3A%AppName servlet : Start
21/06/2023 05:18:12:705 INFO - fefefefef%3A%AppName : ** Pushed Stack Frame [/AppName]
21/06/2023 05:18:12:705 INFO - fefefefef%3A%AppName : Storing :session___sessionid to complex: session:sessionid as [2023172091f]
21/06/2023 05:18:12:706 DEBUG - fefefefef%3A%AppName : no variable for simple: __VPvpms
21/06/2023 05:18:12:707 DEBUG - fefefefef%3A%AppName : no variable for simple: __VPapptracelevel
21/06/2023 05:18:12:708 INFO - fefefefef%3A%AppName : Storing :InputDNIS to simple: InputDNIS as [123456789112]
21/06/2023 05:18:12:708 DEBUG - fefefefef%3A%AppName : *** Reply for [/AppName/Start] ***
21/06/2023 05:18:12:709 DEBUG - fefefefef%3A%AppName : 0:<?xml version="1.0" encoding="UTF-8"?>
GOOD CALL LOGS:
21/06/2023 05:19:31:856 INFO - Dbfiwebfbew:/AppName : SCESession bound to HttpSession Dbfiwebfbew
21/06/2023 05:19:31:856 INFO - Dbfiwebfbew:/AppName : Browser Version 2.1.4, terminationURL enabled : true
21/06/2023 05:19:31:856 DEBUG - Dbfiwebfbew:/AppName : PlatformParams:getPlatformParams: __VPVarGlobalDate is 1687192324161
21/06/2023 05:19:31:856 DEBUG - Dbfiwebfbew:/AppName : PlatformParams:getPlatformParams:Timestamp is 06/19/23 12:32:04
21/06/2023 05:19:31:856 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get global parameters from VPMS...
21/06/2023 05:19:31:960 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: AppRuntimeVarsResponse.getGlobalAppRuntimeVars returns status - success
21/06/2023 05:19:31:960 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VP__ICR__ICRCore_Address|1.12.3.1#1##1.12.3.1#1
21/06/2023 05:19:31:960 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPLicenseServerURL|https://1.12.3.1:8008/WebLM/LicenseServer
21/06/2023 05:19:31:960 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPConversationServer|
21/06/2023 05:19:31:960 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPConversationServerTimeout|60
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPConversationServerType|Internal
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPConversationType|Internal
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPEDContextStore|
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPEDPlatform|
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPEDPlatformTimeout|60
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPappintf|/axis2/services/VPAppIntfService
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPapplog|/axis2/services/VPAppLogService
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPappvars|/axis2/services/VPAppVarsService
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPepmguid|Dbfiwebfbew
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPzoneepm__0|1.12.3.1|1.12.3.2|1.12.3.3
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPzoneids|0
21/06/2023 05:19:31:961 DEBUG - Dbfiwebfbew:/AppName : PlatformParams: get parameter|value - __VPzonename__0|Default
21/06/2023 05:19:31:961 INFO - Dbfiwebfbew:/AppName : Using SCESession Dbfiwebfbew:/AppName servlet : Start
21/06/2023 05:19:31:962 INFO - Dbfiwebfbew:/AppName : ** Pushed Stack Frame [/AppName]
21/06/2023 05:19:31:963 INFO - Dbfiwebfbew:/AppName : Storing :session___sessionid to complex: session:sessionid as [2023172091f]
21/06/2023 05:19:31:963 DEBUG - Dbfiwebfbew:/AppName : no variable for simple: __VPvpms
21/06/2023 05:19:31:964 DEBUG - Dbfiwebfbew:/AppName : no variable for simple: __VPapptracelevel
21/06/2023 05:19:31:964 INFO - Dbfiwebfbew:/AppName : Storing :InputDNIS to simple: InputDNIS as [123456789112]
21/06/2023 05:19:31:965 DEBUG - Dbfiwebfbew:/AppName : *** Reply for [/AppName/Start] ***
21/06/2023 05:19:31:965 DEBUG - Dbfiwebfbew:/AppName : 0:<?xml version="1.0" encoding="UTF-8"?>
Please let me know your thaughts.
Thanks
|
|
[+]
Avaya Orchestration Designer
» OD Application not working Using F5 Load Balancer, 16/06/2023 09:05:39
» Go to message
|
|
Hello Support Team,
Can somebody help me on above problem.
Thanks.
|
|
[+]
Avaya Orchestration Designer
» OD Application not working Using F5 Load Balancer, 14/06/2023 09:31:29
» Go to message
|
|
Hello,
I have simple OD application that takes the input from other application. After taking the input it process the data and return the value.
When I am calling this OD application using the F5 load balancer my application giving me error and call is going to the Bedfetch event node (I am catching error.bedfetch event in APPRoot node).
I am Getting the below error when checking the logs on log viewer tab of AEP:
error.badfetch.http.500 URI: AppName?___DDSESSIONID=fefefefef%3A%AppName
HTTP Error for url = "F5 Url"/AppName?___DDSESSIONID=fefefefef%3A%AppName, Method = POST, HttpStatus = 500, HTTPStatusDescription = Internal server error
If I call application without F5, it is working fine.
Can somebody help me on the above issue.
Thanks in advance.
|
|
[+]
Proactive Outreach Manager
» POM Custom Class not working, 15/11/2019 04:07:22
» Go to message
|
|
Is there anyone who can help me on this.
|
|
[+]
Proactive Outreach Manager
» POM Custom Class not working, 13/11/2019 07:33:33
» Go to message
|
|
Hello Everyone,
I have created the the pom custom restrictions application class for custom restrict node using the developer guide of POM.
I follow all the steps which is mention in the POM developer guide.
My custom class name is 'testCustomRestriction'. Below is the code of my class(same as in doc):
public class TestCustomRestriction implements PomCustomRestriction {
@Override
public boolean processCustomRestriction(PomInfo pomInfo, String result) {
System.out.println("Inside custom restriction processing for " + result);
System.out.println("Campaign Name: " + pomInfo.getCampaignName());
System.out.println("Job ID: " + pomInfo.getJobId());
System.out.println("POM Session ID: " + pomInfo.getPimSessionId());
System.out.println("User Contact ID: " + pomInfo.getContactId());
System.out.println("User Contact Group Name:" + pomInfo.getContactGroupName());
System.out.println("Address: " + pomInfo.getAddress());
System.out.println("Address Timezone: " + pomInfo.getAddressTimeZone());
System.out.println("Address Country: " + pomInfo.getAddressCountry());
return false;
}
}
After creating the class. I created the jar file of my .class file then I copy the created .jar file on '$POM_HOME/lib/custom' folder and restart POM service by typing '/sbin/service POM restart' command.
After restarting the POM server, I Specify the fully qualified class name in the custom class name parameter of the custom restrict node.
Then, I run my campaign. After running campaign my Custom class is not worked.
I am getting the below error:
"P_POMCM006|INFO|POMCM|||External class(es) used in Contact Strategy for campaign Test are not valid or not accessible| POM server IP "
Can somebody help me to resolve the issue.
Thanks in advance.
|
|
[+]
Avaya Orchestration Designer
» Weblm License issue, 22/10/2019 07:49:47
» Go to message
|
|
Also, can you please explain me what happen in the background If I keep the blank License url inside the runtimeConfig of Tomcat?.
If there is document of avaya for this can you please share to me it will be very helpful for me.
Thank you once again.
|
|
[+]
Avaya Orchestration Designer
» Weblm License issue, 22/10/2019 07:38:26
» Go to message
|
|
Hello Wilson,
Thanks for the reply.
Yes I am making the Live calls.
Below are the error I see in the report.log file of my application:
18/10/2019 08:26:41:092 ERROR - In Progress | channel:unknown | Test_Application:Start | null | License server URl Error :java.net.MalformedURLException | null | null |
18/10/2019 08:26:41:092 ERROR - ALARM | channel:unknown | Test_Application:Start | | License server URl Error :java.net.MalformedURLException | null | null |
Thanks.
|
|
[+]
Avaya Orchestration Designer
» Weblm License issue, 21/10/2019 13:41:34
» Go to message
|
|
Hello All,
I have a OD application and I run this application on tomcat server. Before I have configured the license url on 'runtimeconfig' of tomcat and it was running successfully.
Now I have remove the license URL from 'runtimeconfig' of tomcat and keep it blank on runtimeconfig. As of my understanding if we keep the license URL blank on 'runtimeconfig' then OD application takes the License of AEP.
But when I deployed my OD application on tomcat server after removing license URL from 'runtimeconfig' of tomcat, I am getting the below error in the trace.log file of OD application:
"License: Use the license server url in VPMS instead - null
Remaining grace period 2590403586
License is bad, allowing grace period
icense refresh timer started"
Also below,
"License server URI error: java.net.MalformedURLException".
FYI, I have moved OD licenses to the WebLM servers.
Please suggest me what I need to do for above errors. Because i wanted to solve this issue ASAP.
Thanks in advance.
|
|
[+]
Avaya Orchestration Designer
» Near End Disconnect, 04/10/2019 12:17:30
» Go to message
|
|
Hello All,
I have a OD application which prompts the user to enter the number and transfer the call with the UUI. This application is currently on production and the average time of this application is in milliseconds.
For some calls, in AEP reports I see the 'Near End Disconnects' in the 'End details' column. But I checked in the application logs and I see in the logs that call is transfer successfully with the UUI.
So my question is why AEP reports showing the 'Near End Disconnects' when call is transfer?
Please let me know How I can solve this issue.
Thanks in advance
|
|
[+]
Avaya Orchestration Designer
» Not getting the Selected VDN from the list, 19/08/2019 09:29:51
» Go to message
|
|
Is there someone who can help me on this....
|
|
[+]
Avaya Orchestration Designer
» Not getting the Selected VDN from the list, 16/08/2019 12:16:13
» Go to message
|
|
Hello,
I have created the Strategy script and the Decision function script in Avaya Dynamic Routing or Business Rule Engine. After creating both the script, I have add the my Dnis entry in the Segmentation table. Then I have added my destination in the Destination column of
Segmentation table. My destination contains the list of vdn's.
Now the problem is when I select the one vdn from the drop down of list of vdn, I am not getting the selected vdn in my Decision function script. I am only getting the list of vdn instead of selected vdn.
So, can you please tell me the methods to take the vdn from the list of vdn in the Decision function script. or is there a function or variable where I get the selected vdn.
Thank in advanced,
|
|
[+]
Avaya Breeze
» Getting 400 error for http based Breeze snap-in, 01/08/2019 05:12:21
» Go to message
|
|
Hello Patrick,
Please find the attached files of TestingMsg svar, my built and http_TestingMsg_80.conf file
Thanks
|
|
[+]
Avaya Breeze
» HTTP JAX-RS based breeze snap-in, 31/07/2019 09:47:32
» Go to message
|
|
Hello Everyone,
Posting my question again.
I have created the one simple http based Breeze snap-in using the 'Avaya Breeze Snap in Development guide Release' documents.
My sample snap-in just returning the 'Hello World'. Below are the two files with code which is present in my snap-in code:
1) MyResource
package com.avaya.TestingSnap;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
/*
* This class is needed if you are trying to write a JAX-RS based web service. You can enhance this as needed for the application.
*
* For applications which provide call related features only and web service is not required, remove this class.
*
*/
@Path("/myResource")
public class MyResource
{
@GET
public String doGet()
{
return "Hello World";
}
}
2) MyApplication
package com.avaya.TestingSnap;
import javax.ws.rs.ApplicationPath;
import javax.ws.rs.core.Application;
/*
* This class is needed if you are trying to write a JAX-RS based web service. You can enhance this as needed for the application.
*
* For applications which provide call related features only and web service is not required, remove this class.
*
*/
@ApplicationPath("/ws")
public class MyApplication extends Application
{
//Don't need to implement getClasses
}
After hitting the below url in the browser, I am getting the ' 400 Bad request' error.
https://<Avaya Breeze_FQDN>/services/TestingService/ws/myResource
I have followed all the steps from dev guide for creating sample application. But still getting the same error. I am not able to find out why this error is coming.
I have run following commands in system below are the response of that commands
1) after running 'deploy_service -lv', I am getting the below result:
load: + deploy: + run: + car: = TestingMsg-1.0.0.0.0.
2) After running the run "traceHTTP" tool, I am getting the below result:
¦¦HTTP/1.1 400 ¦
¦Connection: close ¦
¦Content-Type: text/html ¦
¦Content-Length: 566 ¦
¦ ¦
¦<html> ¦
¦<head><title>400 Bad Request</title></head> ¦
¦<body bgcolor="white"> ¦
¦<center><h1>400 Bad Request</h1></center> ¦
¦<hr><center>web</center> ¦
¦</body> ¦
¦</html> ¦
¦<!-- a padding to disable MSIE and Chrome friendly error page --> ¦
¦<!-- a padding to disable MSIE and Chrome friendly error page --> ¦
¦<!-- a padding to disable MSIE and Chrome friendly error page --> ¦
¦<!-- a padding to disable MSIE and Chrome friendly error page --> ¦
¦<!-- a padding to disable MSIE and Chrome friendly error page --> ¦
¦<!-- a padding to disable MSIE and Chrome friendly error page -->
I have also attached the 'nginx_http.log' file.
Can you please guide me how to solve this error.
Thanks
|
|