| Member name | Value | Description |
---|
| Unknown | 0 |
The uninitialized (or unknown) feature type.
|
| SendAllCalls | 1 |
The Send All Calls feature allows the user to route all calls to the
destination extension configured by the system administrator.
|
| ForwardAllCalls | 2 |
The Forward All Calls feature allows the user to redirect all calls to the
another extension.
|
| ForwardBusyNoAnswerCalls | 3 |
The Forward All Calls feature allows the user to redirect all calls to the
another extension if the user is busy or user does not answer.
|
| Exclusion | 4 |
The Exclusion feature allows the multi appearance users to prevent the
other multi appearance users having the same extension from
bridging on to an existing call.
|
| LimitCalls | 60 |
Limit Number of Concurrent Calls feature: Users can use this to limit the number of concurrent calls at
a station to one call, where normally multiple call appearances can terminate at the station.
|
| EC500 | 5 |
The EC500 feature allows the user to redirect the call to Cellular extension.
|
| ExtendCall | 7 |
Extend call features allows users to take an extension to Cellular
call on their office phone, and then move it to their cell phone.
|
| CallPark | 8 |
The Call Park feature lets user place a call on hold at user's
telephone for retrieval at any extension
|
| CallUnpark | 9 |
The Call Unpark feature lets user retreive a parked call at any
extension.
|
| AutoCallback | 10 |
The Automatic Callback feature sends user's phone a priority ring, indicating
the previously busy or unanswered extension user dialed is now available.
|
| WhisperPage | 11 |
The Whisper Page feature allows a user to make an announcement to
a person at another extension who is currently on a call; only the
person being paged hears the announcement.
|
| GroupCallPickup | 13 |
The Call Pickup feature lets user answer a call at user's telephone
for another extension in user's call pickup group.
|
| ExtendedGroupCallPickup | 14 |
With Extended Call Pickup capability, users in one pickup group can answer
the telephones for users in another pickup group.
|
| CallingPartyNumberBlock | 15 |
Calling Party Number Block feature allows user to block the sending
of the Calling Party Number for a specific call. the calling party
number is not sent to the public network.
|
| CallingPartyNumberUnblock | 16 |
Calling Party Number Unblock feature allows user to unblock the sending
of the Calling Party Number.
|
| OneTouchRecording | 17 |
One-Touch Recording is an AST - I feature that uses a
'Feature-Named-URI' (FNU) that allows a user to start and end the
recording of an in-progress conversation.
The One Touch Recording feature works on bridged appearances, not
just primary appearances.
|
| DirectedCallPickup | 22 |
Directed Call Pickup allows the user to answer a call
ringing at another extension without having to be a member of a
pickup group.
|
| PriorityCall | 23 |
The Priority Call allows the user to place priority calls or change an
existing call to a priority call.
|
| EnhancedCallForwarding | 24 |
The Enhanced Call Forwarding allows the user to
configure call forwarding for internal or external calls with
separate settings for busy, no reply, and unconditional forwarding.
|
| BusyIndicator | 25 |
The Busy Indicator feature allows the user to observe another
extension for its availability.
|
| Autodial | 26 |
The Autodial feature allows the user or administrator to
configure a button as a speed-dial. User can edit the autodial
Label and/or autodial number. The destinationLabel is always editable
but destinationExtension is editable only if the
IsDestinationExtensionEditable flag is true.
|
| HuntGroupBusyPosition | 28 |
Hunt Group Busy Position is a feature button which allows user to opt-in/opt-out
from Hunt Group calls.
If the extension has been configured as a member of a hunt group,
user will be eligible to receive calls made to that hunt group.
The feature needs to be enabled to stop receiving calls on that hunt group.
When feature is enabled, user will not receive any calls on that Hunt Group.
When feature is disabled, user will start recieving the calls on that hunt group again.
User can also set the personalized label for the button.
|
| TeamButton | 29 |
The Team Button feature allows the user to view the state of another
station and allow the user to answer any calls which are actively
ringing on that station. The button can also be used as a speed dial
to call the monitored station when it is idle.
|
| CrisisAlert | 31 |
The Crisis Alert feature allows the admin to configure crisis alert button for the watcher(Attendant) user.
When a user makes a call to emergency services, the watcher is alerted.
The watcher should acknowledge the alert.
|
| MaliciousCallTrace | 47 |
Malicious Call Trace (MCT) feature lets a user to notify SM about a malicious call
when a user invokes the Malicious Call Trace feature on an incoming call.
|
| NoHoldConference | 49 |
The No Hold Conference feature allows a user to set up a conference call without interrupting the current
conversation.The called party is automatically added to the conference as soon as they answer.
|
| ServiceObserving | 46 |
The Service Observing (SO) features allow a supervisor or other authorized user to use their telephone to
activate an observing session towards a station, an agent LoginID or VDN to listen in and
possibly talk on calls received by the station/agent or VDN for the purposes of quality control and training.
|
| ForwardBusyCall | 51 |
This feature enables forwarding when the user's extension is busy. It uses the Forward Number destination or,
if set, the Forward on Busy Number destination. If the user has call appearance buttons programmed,
the system will not treat them as busy until all the call appearance buttons are in use.
Note that this feature differs from the feature FORWARD_BUSY_NO_ANSWER_CALLS since the latter one serves
invocation of both busy and not answered cases (for platforms where the two cases can not be supported separately).
|
| ForwardNoAnswerCalls | 52 |
This feature enables forwarding when the user's extension is not answered within the period defined by their No Answer Time.
It uses the Forward Number destination or, if set, the Forward on Busy Number destination.
Note that this feature differs from the feature FORWARD_BUSY_NO_ANSWER_CALLS since the latter one serves
invocation of both busy and not answered cases (for platforms where the two cases can not be supported separately).
|
| ForwardNumber | 53 |
This feature sets the number to which the user's calls are redirected. This can be an internal or external number.
This feature does not activate forwarding; it only sets the number for the forwarding destination.
This number is used for all forward types; Forward Unconditional, Forward on Busy and Forward on No Answer,
unless the user has a separate Forward on Busy Number set for forward on busy and forward on no answer functions.
|
| ForwardBusyNumber | 54 |
This feature sets the number to which the user's calls are forwarded when Forward on Busy or Forward on No Answer are on.
If no Forward on Busy Number is set, those functions use the Forward Number.
This feature does not activate the forwarding, it only sets the number for the forwarding destination.
|
| AutoConference | 55 |
This feature can be used to place the user, his current call and any calls he has on hold into a conference.
If the call on hold is an existing conference, the user and any current call are added to that conference.
|
| CancelAllForwarding | 56 |
This feature cancels all forms of forwarding on the user's extension including "Follow Me" and "Do Not Disturb".
|
| ForwardToVoicemail | 50 |
This feature allows the user to define voicemail box usage.
When feature is enabled: the user's voicemail mailbox is used to answer calls which ring unanswered or arrive when the user is busy.
When feature is disbaled: the user's voicemail mailbox box is not being used to answer calls. This does not disable the voicemail mailbox
being used as the target for other functions such as call recording or messages forwarded from other mailboxes.
|
| StationLogout | 57 |
This feature logs the user off the phone or soft client he is currently logged in.
Results in regular logout process for the environments/platforms which do not let the user to logout without this
feature assigned.
|
| DirectDial | 58 |
This feature allows to call an extension and have the call automatically answered on speaker phone after 3 beeps.
The extension called must support a handsfree speaker. If the extension does not have a handsfree microphone then the user
must use the handset if they want to talk. If the extension is not free when called, the call is presented as a normal call
on a call appearance button if available.
|
| AutoMessageWait | 59 |
This feature shows Message Wait Indication for any extension other than owner's extension.
This feature is configured to monitor Message Waiting Indication (MWI) status for any given extension via MWI Notify.
User can only see the status of MWI and cannot take any action on this feature.
|
| MoveCall | 61 |
This feature allows a call to be moved to Simultaneous/Twinned clients.
|
| RetrieveCall | 62 |
This feature allows a call to be retrieved from Simultaneous/Twinned clients.
|
| InternalTwinning | 63 |
When this feature is active, incoming calls will ring on the user's own extension and another extension within the same IP Office.
This feature can only be configured by the IP Office administrator.
User will not be able to activate / deactivate this feature.
|