Thanks Suzhen! I got my BREEZE 3.2 working with these sVARs.

Regards,
Rahul

Yes, i have checked and verified this page before. And my setting is correct. No error can be seen in SystemOut.log as well

HI Craig,

I have attached the screen shot. I have installed 219 snap-in and i am getting this error in the Browser.

I tried with and without / in the end and i have same issue. It is still stuck on error with 218 snap-in.

Only one thing I would like to say is, I started having this issue since i enabled the Breeze Cluster to accept HTTP connections. I unchecked the flag on BREEZE configuration (Only allow secure web communications) and then re-started the cluster. I could se port 80 on my snap-in but then started seeing this issue.

I could enable was access from command line by using "was set console on" command.

The error message description that i have is:

A WebGroup/Virtual Host to handle <host>:9080 has not been defined.

On the IBM cosole, i saw that there is already *:9080 entry under the virtual host. So not sure what is wrong here.

Funny thing is, even if there is no Voice Biometrics snap-in installed, still the web URL can be hit and gives the same error. Hence, i am guessing something is cached in the Websphere configuration. I did restart the BREEZE node but problem perisists.

Only way i can continue my work right now is to by uninstalling and deleting existing 218 snap-in and installing new snap-in with code changes but still keeping 218 number.

1. I installed my custom made Voice Biometrics snap-in on BREEZE. It worked. Version was 1.0.0.0.218.
2. I made changed in the code and created snap-in 1.0.0.0.219.
3. I uninstalled 218 snap-in and then Installed snap-in 219. Now, when accessing snap-in web UI page, I have this error mentioned.
4. Now, I deleted 218 version snap-in from SMGR. I rebuilt new snap-in with code changes but gave it number 218 again.
5. Installed this 218 snap-in and it starts working again.

So bottom line, any snap-in with other than 218, i have same error.

Hope this helps.

Google search mentioned this:

Looks like you are accessing your store either via http server or you have changed default web container port. Go to admin console Environment > Virtual hosts > default_host (or host that is mapped to your module if different) > Host aliases. Add new alias *:80. Restart the server.

And indeed i am using port 80.

But i don't know, how to access admin console of websphere. I have seen my ex-colleagues but i can't quite remember how they did it.

Thanks,
Rahul

HI there,

i am getting below error in the Browser after installing 219 version of VoiceBiometricsService snap-in. I uninstalled all the versions and still browser gives same errror. Breeze node restart has no effect either.

SRVE0255E: A WebGroup/Virtual Host to handle /VoiceBiometricsService-1.0.0.0.218/ has not been defined.

Only when i install same version of VoiceBiometricsService snap-in, the error goes away.

I have seen this issue before as well. but not sure, how to fix this one.

Thanks,
Rahul

Hi team,

I need to 3.2 snap-in SVARs for CallEventControl and EventingController that comes with BREEZE 3.2. We are trying to install BREEZE 3.2 setup in the lab to fix small issue. However, we need these two snap-ins before we can setup the cluster.h

Does anyone can have these two SVARs?

THanks in advance,
Rahul

HI Prasanna,

Thanks for your response. I was successfully able to create external Authorization client using certificate and then got access token by sending JWT signed with PRIVATE key to Authorization token service. And using access token, i was able to validate it and use it in the Resource Server snap-in to serve by REST request. .

However, I still have question. How do i retrieve the scope for the bearer token sent in the API request? For example, i have read and write scope. And i want to cross check if the bearer token has read or write permission as per by REST API i.e. if someone calls a REST API that needs write permission but access token was generated using read permission only, i want to block this request. Where do i do this check within Resource server?

Thanks,
Rahul

Hello experts,

I am trying to create an External Authorization client on the BREEZE 3.8. I want to use the client credentials flow which means, i do not need the redirection. Hence on the Add new External Authorization Client page, i do not need to add the redirect URL right?

Also, when I upload the certificate, all i need to do is to create JWT token using client id & certificate in the asked JWT format and then call the token URL which should then authenticate my request using JWT token and generate the bearer token.

next, I collect the bearer token and pass it in Authorization header while accessing the resource on the Resource Server.

Am i missing anything? Unfortunately there is no working example for client credentials flow except the documentation. hence i want it make sure my understanding is correct

Yes I have those statements to lookup if i received anything on the servlet. But it does not get anything. But in between I managed to do the same using fetch. and it worked fine.

No... application is inside firewall.

Yes I have tested the URL from browser. But it does not work from the ccxml. Not sure why?

Hi

I am trying to make an HTTP request from ccxml but it gives error as error.send.failed.

here is the code snippet:

<var name="sample" expr="'hello123'"/>
<send target="'http://148.147.228.202:8000/HelloServlet'" targettype="'basichttp'" name="'http.get'" namelist="sample" delay="'0s'"/>


Here is the error from log:

error.send.failed
delay: "0"
event.sample: "hello123"
name: "http.get"
okto.tagname: "command.send"
sendid: "1174405332"
sessionid: "vp-2009182073558-20"
target: "http://148.147.228.202:8000/HelloServlet"
targettype: "basichttp"


Any help on this would be really great!.

Hi

I am trying to make an HTTP request from ccxml but it gives error as error.send.failed.

here is the code snippet:

<var name="sample" expr="'hello123'"/>
<send target="'http://148.147.228.202:8000/HelloServlet'" targettype="'basichttp'" name="'http.get'" namelist="sample" delay="'0s'"/>


Here is the error from log:

delay: "0"
event.sample: "hello123"
name: "http.get"
okto.tagname: "command.send"
sendid: "1174405332"
sessionid: "vp-2009182073558-20"
target: "http://148.147.228.202:8000/HelloServlet"
targettype: "basichttp"


Any help on this would be really great!.

Thanks very much for the help. I had a problem in CCXML since the transition ccxml.loaded was absent.